IN THE NEWS
smt.iConnect007 - SMarTsol Technologies, a technical services and equipment provider for Mexico and the US, is pleased to offer PYRAMAX reflow ovens from BTU International. PYRAMAX ovens provide optimized lead-free processing for the ultimate in productivity and efficiency.
US-Tech - BTU International, Inc., a leading supplier of advanced thermal processing equipment for the electronics manufacturing market, today announced the appointment of Smd-Tec as its new exclusive distributor for reflow soldering systems in the Benelux region.
WNIE - Sept 2022- Naprotek, LLC., a leading provider of high-reliability, quick-turn electronics manufacturing, has purchased a BTU PYRAMAX reflow oven to provide customers with the most cutting-edge solutions.
Circuitnet - February 2022 - Rob DiMatteo, General Manager, comments on market conditions and outlook for BTU's business.
Podcast - March 2021 - Want to learn more about vacuum reflow? Check out The Reliability Matters Podcast, episode 64 (first of series of 2) with Mike Konrad. This episode features BTU’s Fred Dimock and Timothy O'Neill from Aim Solder.
Intel - March 2021 - announces 2020 Intel Supplier Achievement Award SSAA) in COVID‐19 Response to Amtech Systems, BTU International Division.
Circuitnet - February 2021 - Peter Tallian, General Manager, comments on market conditions during the Covid-pandemic and the effect on BTU's business.
SMT Today - August 2020 – Peter Tallian covers BTU’s 70 years in business, from its humble beginnings in 1950 in Cambridge, MA, to the current global presence with manufacturing and engineering locations in the USA and China.
I-Connect007 - February 2019 - Bob Bouchard, BTU's Corporate Marketing Manager, talks to Managing Editor, Nolan Johnson, of I-Connect007 about BTU's new Aqua Scrub flux management technology that debuted at APEX 2019. The AquaScrub is very innovative and shows a lot of promise to reduce cost of ownership by extending reflow oven maintenance cycles and costs.
USTech - July 2018 - Michael Skinner of USTech visted BTU's USA Headquarters, where custom belt furnaces have been manufactured for nearly 70 years. The article covers BTU's capabilities for high temperature, controlled atmosphere processing as well as BTU's history in the reflow oven industry.
Global SMT & Packaging - May 2018 - BTU celebrated three award wins at Nepcon China 2018. The first was for their Pyramax vacuum reflow technology to assist in void reduction. The second was Profile Guardian which continuously montors the temepature in each reflow oven heating zone and the third award was for the Trueflat technology for substrate flatness.
Global SMT TV - February 2018 - Bob Bouchard talks to Trevor Galbraith about BTU's latest developments with the Pyramax Vacuum voidless solder reflow oven and the Profile Guardian redundant process monitor system.
SCOOP tv - November 2017 - Peter Franklin and Bob Bouchard give an overview of market conditions and new developments including Industry 4.0 and the new Pyramax Vacuum reflow oven.
Global SMT & Packaging - September 2017 - Paul Lancaster is interviewed by Trevor Galbraith regarding the introduction of BTU's new Profile Guardian reflow oven redundant process monitor. Industry 4.0 trends and implications are also discussed.
SCOOP - September 2017 - Paul Lancaster discusses the new Profile Guardian reflow oven redundant process monitor which adds process traceability through thermocouple probes and software integration. In addition the current trends and needs for Industry 4.0 as it applies to the reflow process are discussed.
SCOOP- February 2017 - Bob Bouchard talks to Kim Sauer about the direction of the market and BTU's latest developments, including the new ZeroTurn dual chamber reflow oven.
Real Time with - September 2016 - Kristen Mattson discusses the impact of reflow oven operating cost and new tools that can be used to reduce nitrogen and power consumption at SMTAI 2016 in Chicago.
SCOOP - April 2016 - Bob Bouchard talks to Kim Sauer about two reflow oven software solutions: Energy Pilot for energy management and RecipePro for recipe generation, built in conjunction with ECD.
EPP - May 2015 - Peter Franklin discusses important industry trends including industry 4.0 as well as the BTU/Amtech aquisition.
Fred Dimock - US Tech 2015 - Process engineers are often tasked with reducing manufacturing costs. This article highlights the use of new reflow oven operating software to reduce running costs while maintaining oven performance.
Circuitnet- January 2015 - Peter Tallian discusses BTU's accomplishments in light of the 65th anniversary as well as BTU's latest developments for reflow technology.
Global SMT - October 2014 - Jim Griffin discusses BTU's latest technology in lowering Cost of Ownership for SMT Reflow. BTU's Energy Pilot software takes advantage of idle time to lower operating costs by up to 40% while ensuring product yield.
Kim Sauer talks to Rob DiMatteo, Regional Sales Manager, BTU International, at SMTAI 2014 about current industry trends, with particular focus on the Americas. With customer demand for process improvements and lower costs, Rob introduces the company’s ‘Energy Pilot’ feature that addresses those customer needs with its power & energy management solution.
EMSNow-Oct 2013 - Philip Stoten from EMSNow talks to Paul Lancaster, Director of Sales America, BTU International to talk about the Dynamo, the latest offering from BTU, the industry and the challenges in decreasing changeover times.
June 2012 - Michael Lewis of ThomasNet interviews BTU International's CEO, Paul van der Wansem, regarding BTU's recent charitable initiatives supporting education in the local community.
June 2012 - PRUF LED has flipped the switch on the most cutting-edge, fully automated SMT production facility to manufacture a broad spectrum of LED lighting panels - including a BTU Pyramax convection reflow oven.
David C. Wong, Ph.D., chief solar scientist at BTU International, gives an overview of diffusion techniques with a highlight on process improvements including in-line processing.
Fred Dimock, a BTU Process Engineer, discusses methods for profiling solar cells including materials and TC placement.
BTU's Meridian™ In-Line Diffusion system is featured an in an informative article on Cost of Ownership in the photovoltaics industry.
September 2009 - BTU's CEO, Paul van der Wansem, discusses BTU's markets and its transition to alternative energy. In addition, Mr. van der Wansem comments on BTU's new products, operations and key personnel.
September 2009 - Belt speed, zone temperatures and static pressure all impact peak temperature.