Closed Loop Convection Upgrade
This upgrade provides closed loop convection rate adjustment via the WINCON™ operating software. This is accomplished by monitoring the static pressure in the heating and cooling blower plenums and applying a signal to the frequency controllers to vary the blower frequency of the designated control zones. This type of control is the most accurate method…
Read MoreBlower Fail Detection Upgrade
Provides real-time monitoring of convection to reduce yield loss. This is accomplished by monitoring the zone static pressure with a differential pressure switch. If a blower system fails or drops below the low limit pressure in the zone an alarm is triggered. This system monitors the heated section only. The system reports a failure through…
Read MoreCooler Flux Filter Upgrade
Reduces cooler maintenance frequency by trapping solid flux residues. Some flux chemistries create excessive build-up of solids on the cold heat exchangers in the cooler. This upgrade involves attaching a filter to the front face of the heat exchanger in the cooler using existing mounting holes. These filters will collect much of the solid residue…
Read MoreNitrogen Fast Purge Upgrade
Allows faster start-up and recipe change over times through increased gas flow rates — The Nitrogen Fast Purge option allows users to return to production ready atmosphere purity faster by allowing maximum flow of source Nitrogen. This is helpful in production environments where the oven is not running 24/7 or if it is critical for…
Read MoreFlux Trap Lip Vent Upgrade
Reduces maintenance on facility exhaust and increases yield — For reflow ovens with or without flux management, the Flux Trap Lip Vent provides a way to collect flux, both keeping it from dripping on product and clogging facility exhaust.
Read MoreIntellimax & Wincon Upgrade
WINCON™ is an advanced windows-based software system for controlling the operation of BTU thermal processing equipment. WINCON is used in conjunction with BTU’s proprietary INTELLIMAX™ control board on all BTU systems; including the Pyramax and Aurora families of convection reflow ovens. Upgrading your WINCON software not only allows users to take advantage of new features…
Read More